You can simply place T1 on a horizontal surface like a shelf, or you can mount it on a wall or ceiling.
1. Select a good spot
Select a good spot for your camera, place or install the camera in a position where its view is not blocked and ensure that it is within the coverage of your Wi-Fi network.
Note: Check your camera's video stream with the rockhome app. The PIR sensor is more sensitive to movements across the camera's field of view than movements toward or away from the camera.
For outdoor use, please install the camera upside down to maximize the waterproof performance and the infrared human body sensor's effectivity.
2. Install the bracket
Hold the bracket up where you want to mount your camera and screw it in.
Note: When drilling holes, drill only one to start with. Drill the other three holes using the slots as a guide. Then, insert the plastic expansion tubes into holes, place the bracket on the surface and screw the mounting screws into the expansion tubes.
3. Fix the camera
Put your camera upside down, attach it to the bracket, and fix the camera with the screw included.
